Vehicle Damage Warnings

CAUTION:
^ If the liquid or vapor tube is damaged (torn, holes or delaminated) the affected tube assembly must be installed new. Do not use aftermarket sleeving. Do not re-adhere loose sleeving material.
^ When reusing liquid or vapor tube connectors, make sure to use compressed air to remove any foreign material from the connector retaining clip area before separating from the tube. Apply clean engine oil to the end of the tube before inserting the tube into the connector.
^ Make sure that the float or arm are not damaged while removing the fuel pump module.
^ Inspect the surfaces of the fuel pump module flange and fuel tank O-ring contact surfaces. Do not polish or adjust the O-ring contact area of the fuel pump flange or the fuel tank. Install a new fuel pump module or the fuel tank if the O-ring contact area is bent, scratched or corroded.
^ Make sure to install a new fuel pump module O-ring and lock ring.