Seat Cushion Cover - Front

Seat Cushion Cover - Front

Removal and Installation

1. Remove the front seat backrest. For additional information, refer to Seat Backrest - Front Seat Backrest - Front.

2. NOTE: Trim cover J-clip configurations vary with seat option.

Release all the remaining J-clips attaching the trim cover to the cushion frame.

3. NOTICE: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn from the cushion foam pad.

Release the hook-and-loop strips, remove the hog rings (if equipped), separate the cushion trim cover from the cushion foam pad and remove.

4. To install, reverse the removal procedure.