Transducer Solenoid Test - Cruise Master

Fig. 1 Transducer regulator. 1980 Cruise Master:

Fig. 3 Transducer regulator. 1981---83 Cruise Master:

1. Disconnect electrical connector from transducer hold terminal, Figs. 1 and 3.
2. Connect ohmmeter between hold terminal on transducer and ground. Meter should read 5---6 ohms.
3. If meter reading is less than 4 ohms, a shorted coil is indicated.
4. If meter reading is more than 7 ohms, an open coil is indicated.