Differential Assembly: Specifications
Rear Axle, Bearing Specifications<cfbgm-060>
| Carrier Type | Integral | |
| Ring Gear & Pinion Backlash | Method | Shim |
| Adjustment | 0.005-0.009 | |
| Pinion Bearing Preload | Method | Spacer |
| New Bearings | 24-32 Note: Measured with torque wrench at pinion flange nut | |
| Used Bearings | 8-12 Note: Measured with torque wrench at pinion flange nut | |
| Differential Bearing Preload | Method | Shim |
| New Bearings | - Note: Slip fit plus .004 inch preload on each side | |
| Used Bearings | - Note: Slip fit plus .004 inch preload on each side |