Technician Safety Information

NOTE: Various "WARNING:" and "CAUTION:" messages are contained throughout this manual, to indicate potentially hazardous conditions that may be present when performing certain services or repairs. Be sure to read, understand, and adhere to these precautions before performing the described services.

ADDITIONAL GENERAL SAFETY PRECAUTIONS
1. Always wear appropriate eye protection.
2. Use caution when working near the catalytic converter to prevent the possibility of burns. The temperatures within the converter can exceed 1000°F.
3. Ignition systems present a shock hazard; exercise care when performing spark test and always use non-conductive ignition wire pliers.
4. When servicing the fuel system use the following cautions:
a. Put a "CAUTION: FLAMMABLE" sign in the workshop.
b. Be sure to furnish the shop with the proper fire extinguisher.
c. Be sure to disconnect battery ground cable before any service work is done.
d. Place a suitable container under the connection to be opened.
e. On vehicles with port or throttle body fuel injection, always relieve fuel system pressure prior to disconnecting fuel system components. Slowly open connection, allow pressure to escape, and catch spilled fuel in container.
NOTE: If available, use system bleed valve (schrader) to relieve pressure.
f. Disconnect line or hose, then plug all fittings.
g. Put any drained fuel in an explosive-proof container and put the lid on securely.