Compressor Replacement

COMPRESSOR REPLACEMENT

Remove or Disconnect






1. Discharge the system.
2. Connector attaching bolt
3. Connector.

^ Cap or plug open connections.

4. Electrical lead to the clutch acutuating coil.
5. Bolt.

^ Loosen the bracket and pivot bolts.

6. Compressor.

^ Drain and measure the oil.
^ Check for contamination.


Install or Connect






1. Oil to the compressor.

Important:

^ Replace with fresh oil. If the system was serviced, install a full, fresh charge of refrigeration oil.

2. Compressor.

^ Position to the mounting bracket.

3. Nuts, bolts and spring washer.
4. Connector assembly to the rear of the compressor.

Important


^ Use new seals (0-rings) coated with clean refrigeration oil.

5. Electrical lead to the coil.
6. Compressor belt.

Adjust

^ Belt. Refer to Specifications.

7. Evacuate, charge and check the system.