Claim Information
Submit a Product Campaign Claim with the information indicated below:** * ***
FAILED PARTS LABOR LABOR OTHER NET
REPAIR PERFORMED PC PART NO. ALLOW FC OP HRS HRS AMOUNT
INSTALL MOISTURE
DETECTOR SHIELD 00 V3340 .2 .1 .20
REPLACE W/W PUMP 1 22054183 00 T7235 .3 .1
*Campaign Administrative Allowance.
**The Parts Allowance should be the sum total of the current GMWDD Dealer Net plus 30% of all parts when Labor Op T7235 is performed.
***The $.20 identified in the Net Amount Column for Labor Op V3340 represents 30% of dealer net when parts are furnished at no charge by Chevrolet
Dealers will automatically receive the correct labor and material allowance based on the labor operation performed.
Refer to the Chevrolet Claims Processing Manual for details on Product Campaign Claim submission.
CAMPAIGN IDENTIFICATION LABEL:
CAMPAIGN IDENTIFICATION LABEL
Each vehicle modified in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a space to include the five digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ballpoint pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean dry surface.
(Notification Used By Chevrolet Motor Division)
Dear Chevrolet Owner:
General Motors has become aware of a condition on 1985 and some 1986 Chevrolet C/K Model Light Duty Trucks where the windshield washer pump motor, located behind the plastic reservoir, may become corroded and shorten the life of the motor. A crimp between the inner and outer fender could divert water onto the pump during a car wash or heavy rain or overfilling of the washer jar could cause drenching of the pump motor, thus causing the pump motor to corrode.
To prevent the possibility of this condition occurring on your vehicle, a moisture deflector shield has been included with this notice. Installation of this shield will divert water/washer fluid away from the pump motor assembly. Please follow the service procedure outlined on the back of this letter for the proper installation of this shield. Your Chevrolet dealer will install the shield for you at no charge if you so desire.
We urge you to install or have this shield installed as quickly as possible in order to avoid damage to the washer pump.
If, due to corrosion, the windshield washer pump on your vehicle should need to be replaced within a period of 5 years from the date the vehicle was originally placed in service, Chevrolet will replace the pump at no charge. In the event your Chevrolet truck encounters a failure within the time stated above, please contact your Chevrolet dealer. Instructions have been furnished to Chevrolet dealers for repairing the condition and handling this Special Policy. Parts are currently available through your dealer.
If you have previously encountered these conditions and paid for all or part of the repairs, you should contact your Chevrolet dealer, who will advise you with regard to obtaining reimbursement. You should present the dealer with your original paid receipts or invoices verifying expenses incurred for such repairs.
We suggest you retain this letter and store it in the glove compartment, along with the Owner's Manual, Maintenance Guide, and Warranty Folder.
The enclosed Owner Reply Card identifies your vehicle. Presenting the card to your dealer will assist in completing the services in the shorttest possible time. If you have sold or traded your vehicle, please complete the postage-paid card and return it to us. This will assist us in notifying other affected owners.
Chevrolet is taking this action in the interest of your continued satisfaction with our products.
Installation of Moisture Deflector Shield:
Installation of Moisture Deflector Shield
1. Remove cap and retainer from fluid reservoir.
2. With notch of deflector hole positioned toward rear of vehicle, tuck deflector under the lip of the fender as shown in illustration.
NOTE: Failure to install deflector as instructed will not provide adequate moisture protection for pump.
3. Slip hole in deflector over neck of reservoir, then reinstall retainer and cap.
4. Complete "Owner Reply Card" and return to Chevrolet.