Vehicles Involved
Involved are all 1985 Chevrolet "C/K" model trucks and certain 1986 Chevrolet "C/K" model trucks built within the following breakpoints:YEAR PLANT FROM THROUGH
1985 Flint (#1) FF300001 FF449983
Flint (#2) FF100001 FF214621
Janesville FJ100001 FJ188400
Oshawa F1100001 F1226955
Pontiac FV100001 FV206417
St. Louis FS100001 FS200260
1986 Flint (#1) GF300001 GF312129
Flint (#2) GF100001 GF109113
Janesville GJ100001 GJ111144
Oshawa G1100001 G1111704
St. Louis GS100001 GS109230
Involved vehicles have been identified by Vehicle Identification Number Computer Listings. Computer listings contain the complete Vehicle Identification Number, owner name and address data, and are furnished to the involved dealers with the campaign bulletin. Owner name and address data furnished will enable dealers to follow-up with owners involved in this campaign.
These listings may contain owner names and addresses obtained from State Motor Vehicle Registration Records. The use of such motor vehicle registration data for any other purpose is a violation of law in several states. Accordingly, you are urged to limit the use of this listing to the follow-up necessary to complete this campaign. Any dealer not receiving a computer listing with the campaign bulletin was not shipped any involved vehicles.
OWNER NOTIFICATION
Owners will be notified of this campaign on their vehicles by Chevrolet Motor Division (see copy of Owner Letter included with this bulletin).
DEALER CAMPAIGN RESPONSIBILITY
Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time forward.
Whenever a vehicle subject to this campaign is taken into your new or used vehicle inventory, or it is in your dealership for service in the future, you should take the steps necessary to be sure the campaign correction has been made before reselling or releasing the vehicle.
Owners of vehicles recently sold from your new vehicle inventory are to be contacted by the dealer, and arrangements made to make the required modification according to instructions contained in this bulletin.