Rear Folding Seat - Operation

CHEVROLET NUMBER: 87-T-62

SECTION: 10-Body Section

DATE: January, 1987

SUBJECT: REAR FOLDING SEAT

MODELS: ALL S/T BLAZER/JIMMY MODELS

Future editions of 1987 S/T Blazer/Jimmy Owner's Manuals will be revised regarding rear folding seat movement in the locked position. This revision also applies to 1983 - 1986 S/T Blazer/Jimmy models equipped with the rear folding seat. The revised text reads as follows:

Figure No. 1 - Lowering and Raising Rear Seat:

REAR FOLDING SEAT (BLAZER/JIMMY)

The optional rear seat may be folded to provide additional cargo space.


To fold the seat, push back on the seatback while releasing the mechanical latch located at the rear of the seat cushion (see illustration). Press the release lever and hold, then pull seatback down. The seat is designed to lie completely flat. To raise seat, place hand on the "B" pillar post of the vehicle, then with your other hand, push up on the seatback. Push back and forth now and then on any folding rear seatback to be sure it is locked. Take the vehicle to your dealer for service if it does not lock.