Manual Shift Linkage Adjust

1. Position transmission lever (J), to neutral position by one of the following methods:

a. Obtain neutral position by moving transmission lever (J) counterclockwise to "L1" detent, then three detent positions to neutral.

b. Obtain neutral position by moving transmission lever (J) clockwise to the park detent, then counterclockwise two detents to neutral.

2. Place column shift lever in neutral gate notch by rotating lever until it drops into neutral gate notch. Do not use indicator pointer as a reference to position shift lever.

3. Attach rod (K) to column' shift lever.

4. Slide swivel (A), retainer (B), spacer (C), washer (D) and insulator (E) onto rod (K), then align with lever (H) and complete attachment Torque nut (F) to 9-12 ft. lbs.