Cruise Control Servo Cable: Adjustments

CABALLERO & EL CAMINO



1984---87
Brake Release Switches
The brake electric and vacuum release switches are both mounted on the brake pedal support bracket and are self-adjusting. If either switch is replaced, pull brake pedal rearward against stop until audible clicks are no longer heard. Release brake pedal, then repeat operation. Release switches are now adjusted.

Fig. 26 Servo unit rod adjustment. 1984 Caballero & El Camino w/V6-231 engine:

Fig. 27 Servo unit cable adjustment. 1984 Caballero & El Camino w/V6-229 engine:

Fig. 28 Servo unit rod adjustment. 1984 Caballero & El Camino w/V8-350 diesel engine:

Fig. 29 Servo unit cable adjustment. 1985---87 Caballero & El Camino w/V6-262 engine:

Fig. 30 Servo unit rod adjustment. 1985---87 Caballero & El Camino w/V8-305 engine:

Servo Unit Adjustment
Refer to Figs. 26 through 30 for servo unit adjustments.