With Pulse

^ Try the following checks before doing the System Check.

1. Check the WIPER Fuse by visual inspection.

2. Check that the Wiper Motor mounting bolts are clean and tight.

3. Check that the Wiper/Washer Switch connector C209 is mated correctly.

4. Check that wiper motor module mounting bolt ground is clean and tight.

5. If Washer does not operate, check that:
- Washer reservoir is filled.
- Hoses are not pinched or kinked.
- Hoses are correctly attached.
- Nozzles are not clogged.

^ Go to System Check for a guide to normal operation. With Pulse