Fuel Injector - Wires Trapped Installing Air Cleaner
BULLETIN NUMBER: 93-6D-44SECTION: 6D
NUMBER: 2
CORPORATE
REFERENCE NUMBER: 266402
DATE: February 1993
SUBJECT:
FUEL INJECTOR WIRES MAY BECOME TRAPPED WHEN REINSTALLING THE AIR CLEANER
MODELS:
1988-93 C/K TRUCKS
CONDITION
When an air cleaner is removed on 1988-93 C/K trucks, the potential for trapping the injector wires between the air cleaner and extension ring or between the extension ring and throttle body is present during reinstallation.
CORRECTION
To reduce the possibility of such an occurrence, especially if the reason for removing the air cleaner is a pinched wire, the injector wires should be removed, twisted once and then reconnected.
One twist will reduce the slack in the injector wires so that there is less chance of them being trapped between the mating surfaces during assembly.