| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Rear Axle |
| Complete Assembly Without Transfer of Parts | 3.2 | 0.0 | B | |
| Note |
| To R&R Ring & Pinion, Add | 1.0 | 0.0 | B | |
| To R&R Side Bearings, Add | 0.4 | 0.0 | B | |
| To R&R Gear Kit and/or Clutch Pack, Add |
| Without Locking | 0.2 | 0.0 | B | |
| With Locking | 0.5 | 0.0 | B | |
| To R&R Pinion Cups, Add | 0.2 | 0.0 | B | |
| To R&R Axle Bearings, Add | 0.2 | 0.0 | B | |
| Complete Assembly With Transfer of Parts |
| 8.50 Inch Ring Gear |
| Without Limited Slip | 2.7 | 1.9 | B | |
| With Limited Slip | 3.4 | 2.4 | B | |
| 9.50 Inch Ring Gear |
| Without Limited Slip | 2.7 | 1.9 | B | |
| With Limited Slip | 3.4 | 2.4 | B | |
| 10.50 Inch Ring Gear Without Dana 70 HD |
| Without Limited Slip | 3.1 | 2.2 | | |
| With Limited Slip | 3.4 | 2.4 | | |
| 10.50 Inch Ring Gear With Dana 70 HD |
| Without Limited Slip | 3.1 | 2.2 | | |
| With Limited Slip | 3.4 | 2.4 | | |
| Overhaul/Rebuild |
| Rear Axle |
| Use Differential Case Plus Combinations |