Master Cylinder Removal

Master Cylinder:

CAUTION: Brake fluid will damage electrical connections and painted surfaces. Use shop cloths, drip pans and fender covers to prevent brake fluid from contacting these areas.

1. On vehicles with manual brakes, disconnect the master cylinder pushrod from the brake pedal.
2. On all models, disconnect all wire connectors from the master cylinder components.
3. Disconnect the brake lines from the master cylinder. Cover the ends of the lines to prevent dirt from entering system.
4. Remove the master cylinder mounting nuts.
5. Remove the combination valve bracket.
6. Remove the master cylinder.

CAUTION: Do not allow brake fluid to fall on the Anti-Lock control module, connectors or wiring.

For additional information see Notes, Warnings, and Hints. Fundamentals and Basics