Front Toe Adjustment

Fig. 3 Tie Rod Adjuster Tube:

Fig. 4 Clamp & Sleeve Positioning:

To adjust toe-in, loosen clamp bolts at each end of steering tie rod adjusting sleeves. Replace the clamp bolts if the clamp bolt breakaway exceeds 80 inch lbs. With steering wheel in straight ahead position, turn tie rod adjusting sleeves to obtain proper adjustment. Decrease the length of the tie rod to increase toe-in. Increase the length of the tie rod to decrease the toe-in. After adjustment, check that number of threads showing on the inside of the adjusting sleeves are equal to within three and that the tie rod end stud lines up with steering knuckle. Position tie rod clamps and sleeves as shown in Figs. 3 and 4. Centerline of clamp bolt must be within 30° of horizontal centerline. Torque nuts to 18 ft. lbs.