| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Front Axle |
| Note |
| With Transfer Case Shield, Add | 0.1 | 0.0 | B | |
| To Replace Slip Joint, Add | 0.1 | 0.0 | B | |
| To Replace Front Driveshaft Flange, Add | 0.2 | 0.0 | B | |
| To Replace Rear Support Yoke, Add | 0.1 | 0.0 | B | |
| To Replace Link Yoke, Add | 0.1 | 0.0 | B | |
| To Replace Transfer Case Output Yoke, Add | 0.1 | 0.0 | B | |
| To Replace CV Joint, Add |
| Each | 0.4 | 0.0 | B | |
| To Replace CV Joint Boot, Add |
| Each | 0.3 | 0.0 | B | |
| Rear Axle |
| 8.50 |
| One Piece Driveline |
| To Front Axle | 0.8 | 0.0 | B | |
| To Rear Axle | 0.6 | 0.0 | B | |
| Two Piece Driveline |
| One |
| Front Shaft |
| With Slip Yoke | 0.7 | 0.0 | B | |
| Without Slip Yoke | 0.8 | 0.0 | B | |
| Rear Shaft | 0.6 | 0.0 | B | |
| Both | 0.7 | 0.0 | B | |
| Three Piece Driveline |
| One |
| Front Shaft | 1.2 | 0.0 | B | |
| Intermediate Shaft | 1.3 | 0.0 | B | |
| Rear Shaft | 1.2 | 0.0 | B | |
| All | 2.6 | 0.0 | B | |
| Note |
| With Non-Slip Yoke, Add | 0.2 | 0.1 | B | |
| To Renew Center Support Bearing, Add | 0.5 | 0.3 | B | |
| 9.50 |
| One Piece Driveline |
| To Front Axle | 0.8 | 0.0 | B | |
| To Rear Axle | 0.6 | 0.0 | B | |
| Two Piece Driveline |
| One |
| Front Shaft |
| With Slip Yoke | 0.7 | 0.0 | B | |
| Without Slip Yoke | 0.8 | 0.0 | B | |
| Rear Shaft | 0.6 | 0.0 | B | |
| Both | 0.7 | 0.0 | B | |
| Three Piece Driveline |
| One |
| Front Shaft | 1.2 | 0.0 | B | |
| Intermediate Shaft | 1.3 | 0.0 | B | |
| Rear Shaft | 1.2 | 0.0 | B | |
| All | 2.6 | 0.0 | B | |
| Note |
| With Non-Slip Yoke, Add | 0.2 | 0.1 | B | |
| To Renew Center Support Bearing, Add | 0.5 | 0.3 | B | |
| 10.50 |
| One Piece Driveline |
| To Front Axle | 0.8 | 0.0 | B | |
| To Rear Axle | 0.6 | 0.0 | B | |
| Two Piece Driveline |
| One |
| Front Shaft |
| With Slip Yoke | 0.7 | 0.0 | B | |
| Without Slip Yoke | 0.8 | 0.0 | B | |
| Rear Shaft | 0.6 | 0.0 | B | |
| Both | 0.7 | 0.0 | B | |
| Three Piece Driveline |
| One |
| Front Shaft | 1.2 | 0.0 | B | |
| Intermediate Shaft | 1.3 | 0.0 | B | |
| Rear Shaft | 1.2 | 0.0 | B | |
| All | 2.6 | 0.0 | B | |
| Note |
| With Non-Slip Yoke, Add | 0.2 | 0.1 | B | |
| To Renew Center Support Bearing, Add | 0.5 | 0.3 | B | |