Blower Motor: Service and Repair

REMOVE OR DISCONNECT
1. Battery ground cable.
2. Front screw from right door sill plate.
3. Right cowl side kick panel.
4. Electrical connector from the blower motor.
5. Vent hose.
- Loosen courtesy light screws and remove light (if equipped).
6. Bolt from right dash support.
7. Blower motor flange screws.
8. Motor.
- May be necessary to pry back dash.

INSTALL OR CONNECT
1. Motor.
2. Blower motor flange screws.
3. Bolt in right dash support.
4. Vent hose.
5. Electrical connector to blower motor.
6. Right cowl side kick panel.
7. Front screw to right door sill plate.
8. Battery ground cable.