Rear Sensors

Rear Wheel Speed Sensor:

Remove or Disconnect:

1. Wheel and tire assembly.
2. Brake drum.
3. Primary brake shoe.
4. Sensor wire electrical connector.
5. Sensor wire from the rear axle clips.
6. Bolts (20).
7. [1][2]Speed sensor by pulling the wire through the hole in the backing plate.

Install or Connect:

1. [1][2]Speed sensor.
2. Bolts (20).
3. Tighten bolts (20) to 35 N-m (26 ft. lbs.).
4. Sensor wire to the rear axle clips.
5. Sensor wire electrical connector.
6. Primary brake shoe.
7. Brake drum.
8. Wheel and tire assembly.