Wheels (Aluminum) - Coated Balance Weight Usage

9230chevy01

GMC NUMBER: 92-3E-74

GROUP: 3E Wheels & Tires

DATE: April 1992

CORPORATE
NUMBER: 293502


SUBJECT:
COATED BALANCE WEIGHT USAGE FOR ALUMINUM WHEELS (INFORMATIONAL)

MODELS:
1983-92 C/K, G, M/L, P, R/V, AND S/T VEHICLES





Wheel balance weights are now available through GM Dealer Equipment at a very attractive price. These are original equipment weights that will assure best fit to GM original equipment wheels. The AW series and MC series of polyester coated weights are offered for aluminum wheels. IT IS IMPERATIVE THAT COATED WEIGHTS BE USED ON ALUMINUM WHEELS TO PREVENT COSMETIC DAMAGE TO THE WHEEL. A plastic tipped hammer should also be used to prevent damage to the weight's coating during installation.

Uncoated XT type weights are also offered for passenger car steel wheels.





See chart for usage of AW and MC weights on aluminum wheels by GMC vehicle line. Using the incorrect type of weights will result in improper fit. and such weights may fall off the wheel. This information should be posted near the wheel balancer to aid in weight selection.

"We believe this source and their equipment to be reliable. There may be additional manufacturers of such equipment. General Motors does not endorse, indicate any preference for or assume any responsibility for the products or equipment from this firm or for any such items which may be available from other sources."





ORDER FORM