With Swing Out Doors

The Power Door Locks are operated by reversible motors located in each from door; the side door and the RH rear door. Voltage to the door locks is supplied through the PWR ACC circuit breaker.

Moving either Door Lock Switch mounted in the front doors to LOCK supplies voltage to the lock coil of the Door Lock Relay. This energizes the lock coil in the relay and current flows directly to the front, side and rear Door Locks through the 295 (GRA) wires. Ground for the motors is provided through the 294 (TAN) wires and the normally closed contacts of the UNLOCK contacts in the Door Lock Relay.

Moving one or the Door Lock Switches to UNLOCK reverses the polarity of the system. Current flows through the energized UNLOCK contacts in the Door Lock Relay and ground is provided through the LOCK in the Door Lock Relay contacts.