Gasoline In Fuel
Engine Will Run or Start1. Drain the fuel tank
2. Fill tank with diesel fuel
3. Run engine for 15 minutes
Engine Will Not Run
1. Drain the fuel tank
2. Fill tank with diesel fuel
Shutdown Solenoid Connection:
3. Remove the fuel injection pump shutdown solenoid wire
4. Remove the fuel line between the fuel filter and the injection pump
5. Connect a hose to the fuel filter outlet and run it to a closed metal container
6. Crank the engine for 15 seconds at a time, with one minute cooling periods, to purge gasoline from the system
7. Install the fuel line between the fuel filter and injection pump
HPCA Connector:
8. If the engine temperature is above 52°C (125°F), activate the HPCA (Housing Pressure Cold Advance) on the injection pump. This can be done by disconnecting the two lead connectors at the engine temperature switch and bridging the connector with a jumper wire
9. Install the fuel injection pump shutdown solenoid wire
10. Start the engine and remove the jumper wire
11. Connect the two lead connector
12. Run the engine for 15 minutes