NVG 5LM60 Manual Transmission

Extension Oil Seal Replacement

Remove or Disconnect

Fig 5: Extension Housing Seal Removal (2WD Models):

Tools Required:
- J 23907 Universal Slide Hammer
- J 26941 Output Shaft Seal Remover

- Raise the vehicle.

1. Transmission Oil. Refer to "Drain and Fill" Service and Repair.
2. Propeller shaft Service and Repair.
3. Seal (18), using J 23907 and J 26941 (Fig 5).

Install or Connect

Fig 6: Extension Housing Seal Installation (2WD Models):

Tools Required
- J 36503 Extension Housing Seal Installer

1. New seal (18), using J 36503 (Fig 6).
- Fill between the seal lips with chassis grease.
2. Propeller shaft Service and Repair.
3. New transmission oil. Refer to "Drain and Fill" Service and Repair.
- Lower the vehicle.