Adapt Table

PURPOSE
This value indicates if the current shift will update the 1-2 adapt tables. The adapt tables which are used to modify line pressure.

OPERATION
The following are adaptable contingencies:

- Braking pressure (manual gear ranges).
- Long shift delay (shift delay is the time the solenoid changes state until the shift starts).
- Long shift time.
- Throttle range.
- Significant throttle angle change.
- Hot mode.
- Transmission fluid temperature range.
- Manual gear ranges (D1, D2).
- If shift starts too soon after the solenoid state change.
- Diagnostic failures - 21, 22, 24, 28, 53, 58, 59, 72, 73, 75, 79, 81, or 82.
- Time since last shift.
- Time since the last range change.
- Significant vehicle speed change.