Preliminary Inspection

Before beginning diagnosis, make a visual inspection for the following and repair as needed:

PRELIMINARY INSPECTION

^ Check "GAGES" 20 Amp fuse.
^ Check for bare, broken, or disconnected wires.
^ Check for pinched, cracked, plugged, or disconnected vacuum hoses.
^ Check for binding or misadjusted servo-to-throttle linkage.

If preliminary inspection reveals no solution, follow the testing and inspection procedure chart to isolate and fix the problem.

A quick-check box is made available through Kent-Moore Tool Company under tool number J 34185 (or equivalent). This quick-check box will plug in place of the module and determine which part of the system has a malfunction. Instructions on the operation of this tool are provided with the tool.