Lock Lever

Remove or Disconnect






1. Door trim panel.
2. Power door lock motor to remove lever rod.
3. Remote lever to lock assembly rod.
4. Remote lever to inside lock lever rod.
5. Remote lever to door rivets. Drill out the head of the rivet using a 5 mm (3/16 inch) drill bit.
6. Remote lever from the door.

Install or Connect

1. Remote lever to the door.
2. Remote lever to door fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washer, and nut, to re-attach the handle to the door.
3. Remote lever to inside door lock lever rod.
4. Remote lever to lock assembly rod.
5. Power door lock motor to remote lever rod.
6. Door trim panel.