Liftgate Lock Actuator

Remove or Disconnect

1. Negative (-) battery cable.
2. Liftgate interior molding.
3. Control rods right side and left side from the actuator lever rod.
4. Actuator to liftgate rivets. Drill out the head of the rivet using a 5 mm (3/16 inch) drill bit.
5. Actuator from the liftgate.

Install or Connect

1. Actuator to the littgate.
2. Actuator to littgate fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washei; and nut, to re-attach the actuator to the door.
3. Actuator lever rod to control rods right side and left side.
4. Liftgate interior molding.
5. Negative (-) battery cable.