Side Doors

Remove or Disconnect










1. Negative (-) battery cable.
2. Door trim panel.
3. Wiring harness from the motor.
4. Motor to door rivets. Using a 5 mm (3/16 inch) drill bit, drill the head from the rivet.
5. Motor from the door.

Install or Connect

1. Motor to the door. The lock lever must fit into the arm of the motor.
2. Fasteners. Use a 6 mm (1/4 inch) diameter bolt 13 mm (1/2 inch) long with a spring washer and nut to reattach the motor to the door.
3. Wiring harness to the motor.
4. Door trim panel.
5. Negative (-) battery cable.