Vehicle Speed Sensor: Service and Repair

VEHICLE SPEED SENSOR (VSS)

VSS 2WD Manual Transmission:

VSS 2WD Automatic Transmission:

TOOL REQUIRED: J 38417 Speed Sensor Remover and Installer.

REMOVE OR DISCONNECT
1. Harness connector.
2. Bolt.
3. Vehicle speed sensor.
^ Have a suitable container to catch the fluid.
4. 0-ring seal.

INSTALL OR CONNECT
1. New speed sensor and 0-ring seal.
^ Coat the seal with a thin film of transmission fluid.
2. Bolt.

TIGHTEN
^ Bolt to 11 Nm (97 in. lbs.).

3. Harness connector.
^ Refill fluid as required.