Service Procedure

1. Open hood (C/K), or remove engine cover (P, G) of vehicle.

2. Using a clean, dry cloth, wipe dirt, oil, etc. from the existing Emission Label on the side of the air cleaner.

3. Remove backing from the new label and apply over the existing label.

4. Beginning at the center of the label and using a clean, dry cloth, smooth and secure the new label. Any air bubbles can be removed by puncturing with a pin and smoothing with the cloth.

NOTICE:
Do not attempt to remove or loosen the new label once it has been applied, as this will deface the label.

5. Install "Campaign Identification Label."

PARTS INFORMATION





A new label for each vehicle involved will be mailed to owners of record and involved dealers (stock vehicles) on a no charge basis. DO NOT ORDER THIS PART FROM GMSPO.

WARRANTY INFORMATION





Dealers should submit a warranty claim on each vehicle completed under this campaign.

CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label." Each label provides a a space to include the campaign number and five (5) digit, dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or ball point pen.

Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for periodic servicing by the owner. Apply "Campaign Identification Label" only on a clean, dry surface.

ADMINISTRATIVE PROCEDURE





Procedures covering this campaign are outlined in Section V of your dealership's "GMC Truck Warranty Claims Processing Manual" # P9119.