Four Wheel Drive - 4WD

FRONT WHEEL BEARINGS AND/OR HUB

1. Raise and support vehicle.
2. Remove dust cap, if equipped.
3. Remove locking hub as outlined under "Locking Hub Service."
4. Remove disc brake caliper and position aside. Do not allow caliper to hang from brake hose.
5. Remove wheel bearing outer locknut, lock ring and wheel bearing inner adjusting nut.
6. Remove hub and disc assembly, and outer wheel bearing.
7. Remove oil seal, inner wheel bearing and inner and outer bearing cups using a suitable drift.
8. Reverse procedure to install. Adjust wheel bearings. Refer to, Wheel Bearing/ Adjustments/ Front/ Four Wheel drive-4WD.