Fuel Filter: Service and Repair

Fuel Filter:

WARNING: To reduce the risk of fire and personal injury when the fuel line is disconnected, cover the fuel line with a shop cloth to collect the fuel, and then place the cloth in an approved container.

REMOVAL:

- Disconnect the negative battery terminal.
- Relieve fuel system pressure.
- Raise vehicle.
- Disconnect the fuel lines from the filter.
NOTE: Use a back-up wrench to prevent filter, O-ring, or fuel line damage.
- Remove the filter from the car.

INSTALLATION:

- Install the new filter in position loosely.
- Using new O-rings, install the fuel lines into the filter.
NOTE: Use a back-up wrench to prevent filter, O-ring, or fuel line damage.
- Torque line fittings to 30 Nm (22 lb-ft).
- Secure the filter to the vehicle.
- Lower the vehicle.
- Connect the negative battery terminal.
- START the engine and inspect for leaks.

FUEL STRAINER:
Refer to FUEL PUMP/FUEL GAUGE SENDING UNIT for fuel strainer removal.