External Components

INSTALL OR CONNECT
1. RTV sealer or equivalent to the rear bearing retainer sealing surfaces.
2. Rear bearing retainer bolts to the rear case.

Tighten
- Bolts to 41 N.m (30 lb. ft.).

3. Four-wheel drive indicator switch to the front case half.

Tighten
- Switch to 27 N.m (20 lb. ft.).

4. Speed sensor and bolt to the rear bearing retainer.

Tighten
- Bolt to 16 N.m (12 lb. ft.).





5. Rear output yoke, rubber sealing washer, flat washer, and the rear output yoke nut to the rear output shaft.

Tighten
- Nut to 170 N.m (125 lb. ft.).

6. Front output yoke, rubber sealing washer, flat washer, and the front output yoke nut to the front output shaft.

Tighten
- Nut to 224 N.m (165 lb. ft.).