Compressor Replacement

Compressor Mounting:

Remove or Disconnect
1. Negative battery cable.
2. Discharge and recover refrigerant from the system.
3. Drive belt.
4. Refrigerant hose assembly from compressor.
- Cap or plug all open connections.
5. Electrical connectors, as necessary.
6. Nuts (4) and bolts (3).
7. Compressor (1) from bracket (2).
- Drain and measure compressor oil. Capacity Specifications


Install or Connect
1. Compressor (1) to bracket (2).
2. Bolts (4) and nuts (3). Tighten to 33 Nm (24 lbs. ft.).
3. Electrical connectors, as necessary.
4. Refrigerant hose assembly to compressor.
5. Drive belt.
6. Negative battery cable.
7. Refrigerant to the system.
- Check the system for leaks.