With Air Conditioning

Blower Motor Relay Resistor:

Remove or Disconnect
1. Negative battery cable.
2. Instrument panel compartment.
3. Electrical connectors, as necessary.
4. Screws.
5. Blower motor resistor.


Install or Connect
1. Blower motor resistor.


CAUTION:
Make sure the resistor coils do not contact each other. Improper operation or system damage may result.

2. Tighten screws to 1.9 Nm (17 lbs. in.).
3. Electrical connectors, as necessary.
4. Instrument panel compartment.
5. Negative battery cable.

- Check circuit operation.