Operation CHARM: Car repair manuals for everyone.

Without Air Conditioning

Blower Motor Resistor:






REMOVE OR DISCONNECT
1. Negative battery cable.
2. Roll instrument panel back.
3. Plenum tray.
4. Electrical connector.
5. Screws.
6. Resistor.

INSTALL OR CONNECT

NOTE: When installing resistor to the heater case, do not let the resistor coils contact each other. Improper system operation or vehicle damage could result.

1. Resistor.
2. Tighten Screws to 1.9 Nm (17 lb in).
3. Electrical connector.
4. Plenum tray.
5. Roll instrument panel forward.
6. Negative battery cable.

- Check circuit operation.