Troubleshooting Hints

(PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS)
1. Check TURN B/U Fuse by visual inspection.
2. Check Back Up Lamps for damage to filament or corrosion between bulb and socket.
3. Check adjustment of Back Up Lamps Switch.

- Refer to Park/Neutral Position Switch access.

- Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check (Refer "Troubleshooting Procedure"). Diagnostic Aids
- Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (Refer "Troubleshooting Procedures"). Diagnostic Aids