Air Cleaner Assembly

Air Cleaner (Non Turbo):

WARNING: The air cleaner also functions as a flame arrestor in the event of engine backfire The air cleaner should be installed at all times unless its removal is necessary for repair or maintenance. To help reduce the risk of personal injury and property damage, be sure that no one is near the engine compartment before starting the engine with the air cleaner removed. If engine backfire occurs with the air cleaner removed, there could be a burst of flame and possibly other fire in the engine compartment. On vehicles with diesel engines, do not use starting fluids-immediate engine damage can result. Also take care hot to let objects fall into the engine if the air cleaner is removed. If the engine is running, suction can pull loose objects into the engine. Objects pulled or dropped into the engine can cause costly engine damage.

REPLACEMENT

CAUTION: Extreme care should be taken when removing the air cleaner filter. Remove the air cleaner filter slowly to prevent dirt from falling into the engine. Failure to do so can cause engine damage.

REMOVE OR DISCONNECT
1. Wing nuts and washer.
2. Air cleaner cover off assembly.
3. Air cleaner filter.
4. Air intake duct off snorkel section of assembly.
5. Lift air cleaner assembly up and disconnect Exhaust Gas Recirculation (EGR) hose from both EGR valve and control valve.
6. Seal.