Fuel Heater: Service and Repair

Fuel Manager/Filter:

REMOVE OR DISCONNECT
1. Open air bleed valve on top of the fuel manager/filter to release any pressure in the fuel supply system.
2. Fuel manager/filter, refer to Fuel Manager/Filter Service and Repair. Service and Repair
3. Fuel heater threaded nut, using hand pressure or a strap wrench.
4. Fuel heater from the filter housing.

Clean
- Fuel heater to housing sealing surfaces.

INSTALL OR CONNECT
1. Cap seal into filter housing.
2. Fuel heater.
3. Cap nut.

Tighten
- Cap nut securely by hand.

4. Fuel manager/filter, refer to Fuel Manager/Filter Service and Repair. Service and Repair
5. Bleed air from fuel manager/filter refer to Bleeding Air from Fuel Supply System. Service and Repair