External Components

INSTALL OR CONNECT





1. Detent plunger, detent spring, O-ring seal, and detent plug to the front case half.

Tighten
- Detent plug to 15 N.m (11 lb. ft.).





2. Vehicle speed sensor and O-ring to the rear retainer housing.

Tighten
- Vehicle speed sensor to 31 N.m (23 lb. ft.).

3. Four wheel drive actuator switch and O-ring to front case half.

Tighten
- Actuator switch to 24 N.m (17 lb. ft.).

4. Front output yolk, rubber sealing washer, washer, and yoke nut.

Tighten
- Yoke nut to 200 N.m (150 lb. ft.).