Oil Pump Assembly

ASSEMBLE
1. Needle bearings to mainshaft.
2. Oil pump pickup to the pickup tube.
3. Pickup tube, oil pump pickup, and retainer to the oil pump body.
4. The oil pump drive gear and driven gear into oil pump body.
- Lubricate the assembly with automatic transmission fluid.
5. Oil pump cover and oil pump cover bolts to oil pump body.

Tighten
- Pump cover bolts to 10 N.m (89 lb. in.).

Inspect
- Oil pump operation on the mainshaft. The mainshaft must turn freely within the oil pump. If binding occurs, remove the cover, rotate the gears, and reinstall the cover.