Charging System: Description and Operation

The Generator provides voltage to operate the vehicle's electrical system and to charge its Battery. A magnetic field is created when current flows through the Rotor. This field rotates as the Rotor is driven by the Engine, creating an AC voltage in the Stator windings. The AC voltage is converted to DC by the Rectifier Bridge and is supplied to the electrical system at the Battery terminal.

When the Ignition Switch is placed in "RUN," voltage is supplied to terminal "L", turning on the Regulator. Narrow width pulses are supplied to the Rotor, creating a weak magnetic field. When the Engine is started, the Regulator senses Generator rotation by detecting AC voltage at the Stator through an internal wire. Once the Engine is running, the Regulator varies the field current by controlling the pulse width. This regulates the Generator output voltage for proper Battery Charging and Electrical System Operation.

The Digital Regulator controls the Charge Indicator light with a Solid State lamp driver The lamp driver turns "ON" the light whenever an under-voltage, over-voltage or stopped Generator is detected.