Safety Belt Warning Buzzer

With the Ignition Switch in START or RUN, voltage is supplied to the Audio Alarm Module (buzzer or chime) through the IGN/GAU Fuse (FUSE 4) and the PNK (39) wire. When the Ignition Switch is first turned to START or RUN, voltage from the Audio Alarm Module is supplied to the Fasten Safety Belt indicator in the instrument cluster through the YEL (237) wire. The indicator stays lit for about five seconds.

If the driver's safety belt is not buckled, a ground is applied to the Audio Alarm Module through the BLK/WHT (238) wire from the Safety Belt Retractor Switch. The chime or buzzer will sound for about five seconds.