Keyless Entry: Service and Repair

1. Ground pin G of the Data Link Connector (DLC).
^ Receiver will respond by locking and unlocking all doors within 2 seconds.

2. Press any button of the first transmitter to be programmed.

3. The control module will respond by locking/unlock all doors and activating the liftgate release (if equipped).

4. Press any button of the second transmitter to be programmed (if used).

5. The control module will respond by locking/unlocking all doors and activating the liftgate release (if equipped).

6. Remove the ground from pin G of the Data Link Connector (DLC).

7. Transmitter operation is verified by locking and unlocking the doors and automatically activating the rear window release.