Front Axle Actuator

THERMAL ACTUATOR REPLACEMENT

Fig. 1 Exploded View Of Front Axle:

REMOVE OR DISCONNECT
1. Skid plate (if equipped).
2. Electrical connector from the actuator.
3. Thermal actuator (12) by unthreading.

INSTALL OR CONNECT
1. Thermal actuator (12).
^ Coat the threads with sealant (GM P/N 1052942) or equivalent.

TIGHTEN
^ Actuator to 22 Nm (16 lbs. ft.).

2. Electrical connector.
3. Skid plate (if equipped).