Front Wipers

1. Check condition of FRT WIPER Fuse #11. If Fuse is open, LOCATE and REPAIR source of overload REPLACE Fuse.
^ CHECK for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a Continuity/Voltage Check with a system disconnected. These Circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a Voltage drop with the system operational (Under load)
^ CHECK for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.
2. CHECK for proper mechanical operation. REPAIR binding linkage prior to electrical diagnosis.