Accelerator Pedal Position Sensor: Service and Repair

APP Module And Mounting Bolts:

REMOVAL PROCEDURE
1. Disconnect the negative battery cable. Refer to Battery Disconnect Caution. Vehicle Damage Warnings
2. Disconnect the electrical connector.
3. Remove the mounting bolts (3).
4. Remove the sensor (2).

INSTALLATION PROCEDURE
1. Install the sensor (2) and the mounting bolts (3).

Tighten
^ Tighten the mounting bolts to 1 Nm (10 lb. in.).

2. Connect the electrical connector.
3. Connect the negative battery cable.