Linear Shift Assembly - Disassemble

^ Tools Required:
- J 41352 Modular Column Holding Fixture
- J 41396 Park Lock Cable Pliers
- Or Equivalents

1. Do all Removal Steps. Refer to Shroud and Lock Cylinder Set Replacement.
2. Hexagon flanged head bolt (46).
3. Ball & actuator assembly (45).








4. Pop off locking ring on park lock cable assembly (48).
- Move park lock latch to gain access to lower oval head 6-lobed socket tap screw (47).
5. Two oval head 6-lobed socket tap screws (47) from shift gate.
6. Shift lever clevis (41).
a. Lift up on shift gate and rotate shift lever clevis (41).
b. Clevis (41) from gearshift lever assembly support bracket (49).
7. Park lock cable assembly (48) from support bracket (49). Insert retaining clip.
8. Pry actuator arm of electrical BTSI actuator (61) from outer shift cable ball stud on cable shift cam assembly (44).
9. Pry transaxle shift cable from inner ball stud on cable shift cam assembly (44).
10. Hexagon flange head bolt (46).
11. Cable shift cam assembly (44).
12. Cam bushing (63) from cable shift cam assembly (44).
13. Three flat head 6-lobed socket tap screws (43).
14. Gearshift lever assembly support bracket (49).