High Pressure Safety Valve HVAC: Service and Repair

Compressor - Rear Head:

Remove or Disconnect
1. Recover the refrigerant using J 39500-GM.
2. Remove old pressure relief valve.

Install or Connect
1. Clean valve seat area on rear bead.
2. Lubricate O-ring of new pressure relief valve and O-ring assembly with new 525 viscosity refrigerant oil. Install new valve and torque in place, 9.0 N.m (6.1 lbs. ft.)
3. Evacuate and recharge the system.
4. Leak test system.