Initial Inspection and Diagnostic Overview

Perform the following check to diagnose all transmitter operations, using two transmitters (if available):

1. Move the vehicle outside and as far away from metal objects as possible. The system may not operate if there are metal objects between the transmitter and the vehicle.

2. Lower the windows, turn the ignition "OFF," and close the doors.

3. Standing at the rear bumper, aim the transmitter at the vehicle, and operate all functions on both transmitters (if available).
^ If a single function on one transmitter is inoperative, replace that transmitter.
^ If all functions on one or both transmitters are inoperative, reprogram both transmitters and repeat the diagnosis. If one transmitter will not program, replace the battery in that transmitter.

4. If all functions on both transmitters operate, stand 5 feet from the vehicle at several points around the vehicle and check the operation of both transmitters at each point.
^ If one transmitter does not operate at some points where the other transmitter does operate, replace the battery of the transmitter that does not operate.
^ If both transmitters operate 5 feet from the vehicle, the system is operating properly and no repairs should be attempted.